FRP J321AZ Bit 4 co...
 
Share:

FRP J321AZ Bit 4 con Z3X Box de Cricket  

  RSS

Wolfcuba
(@wolfcuba)
Developer Admin
Registrado: hace 1 año
Respuestas: 161
04/01/2019 3:53 pm  

FRP J321AZ Bit 4 con Z3X Box de Cricket

 

  1. Abrir Software de Z3X Box.
  2. Seleccionar el modelo J320ZN y poner el telefono en modo Download.
  3. Seleccionar : Reset FRP/React/EE.
  4. Una vez teminado hacer un reseteo de fabrica.

 

 

UNLOCK INSTRUCCIONES:
Unlocking with original MSL code:
Warning! Knox warranty must be active (0x00)!
If you have it voided (0x01(void)), then you can't unlock this phone with MSL.
1. Phone must be powered on.
2. Run dialer and type *#0*# (service mode will appear).
3. Connect the phone to UART cable, choose correct COM port in port settings.
4. Press 'Unlock' button.
5. Paste MSL code in new opened window and press 'OK'.

Reading codes using sever:
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)

To reset Google account activation lock:
1. ADB must be activated in any way (you can flash sBoot from combination firmware,
make sure, that you are not upgrade sBoot).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Select device in ADB settings.
4. Press 'Reset FRP' and follow the instructions in program.
5. When process done, press 'Back' on phone and perform factory reset from phone settings.

To reset Google account activation or Samsung reactivation lock:
1. Power on the phone in download mode (turn off phone, press vol.down + home + power).
2. Connect the phone to PC with USB cable, install drivers if needed.
3. Press 'Reset FRP/React/EE' to deactivate Google/Samsung/EE account activation lock.
4. After phone reboot, go to settings and perform factory reset.

Operation: Reset FRP/React/EE
Selected model: SM-J320ZN
Selected port: COM34 MediaTek PreLoader USB VCOM Port
Software version: 34.3

Searching Samsung USB Flash interface... COM85 detected
Configurar conexión ... Listo
Reading PIT from phone... Listo
Searching FRP lock... Listo
Erasing FRP lock... Listo
Reset done
For complete reset FRP, goto 'Backup and reset' and make 'Factory data reset'

Done with Samsung Tool PRO v.34.3

¨Cuando sientas que vas a rendirte, piensa en por que empezaste.¨


Citar
Share:
  
Trabajando

Por favor Iniciar Sesión o Registro